Shihlin electric SL3 Series, Руководство пользователя

Страница: 192 / 211

Appendix 1 Parameter table
Appendix 188
Group
Parameter
Number
Name Setting Range Default Page
10-11 P.61 Remote control function
1: When over-voltage, inverter will reset.
0 141
2: When over-current, inverter will reset.
3: When either over-voltage or over-current, inverter will
reset.
4: When any alarm occurs, inverter will reset.
10-13 P.67 Auto reset times
0: Off.
0 144 1～10: If the alarm exceeds 10-13(P.67) times, inverter
will not reset.
10-14 P.68 Auto reset waiting time 0～360.0s 6.0s 144
10-15 P.69 Auto reset times count Read only 0 144
10-16 P.119
Forward and reverse
rotation dead time
0～3000.0s 0.0s 145
10-17 P.159
Energy-saving control
function
0: Off.
0 145
1: Energy-saving mode.
10-18 P.229 Dwell function selection
0: Off.
0 146
1: Backlash compensation function.
2: Acceleration and deceleration interrupt waiting
function.
10-19 P.230
Dwell frequency at
acceleration
0～599.00Hz 1.00Hz 146
10-20 P.231 Dwell time at acceleration 0～360.0s 0.5s 146
10-21 P.232
Dwell frequency at
deceleration
0～599.00Hz 1.00Hz 146
10-22 P.233 Dwell time at deceleration 0～360.0s 0.5s 146
10-23 P.234
Triangular wave function
selection
0: Off.
0 147
1: If terminal function TRI is triggered, triangular wave
function will on.
2: Triangular wave function is on at all time.
10-24 P.235 Maximum amplitude 0～25.0% 10.0% 147
10-25 P.236
Amplitude compensation
at deceleration
0～50.0% 10.0% 147
10-26 P.237
Amplitude compensation
at acceleration
0～50.0% 10.0% 147
10-27 P.238
Amplitude acceleration
time
0～360.00s/0～3600.0s 10.00s 147
10-28 P.239
Amplitude deceleration
time
0～360.00s/0～3600.0s 10.00s 147
10-46 P.268 Voltage stall level
220V : 155～400V 380V
148
440V : 310～800V 760V
10-55 P.226
Reciprocating machine
function selection 0：Off
0 148
1：Turn on reciprocating machine function
10-56 P.227
Reciprocating forward
limit time
0~3600.0s 0.0s 148