Shihlin electric SL3 Series, Руководство пользователя

Страница: 179 / 211

Appendix 1 Parameter table
Appendix 175
7.1.2 Parameter in group
Group
Parameter
Number
Name Setting Range Default Page
00-00 P.90 Inverter model Read only --- 45
00-01 P.188 Firmware version Read only --- 45
00-02
P.996
～
P.999
Parameter restoration
0: Off
0 46
1: Clear alarm history (P.996=1)
2: Reset inverter (P.997=1)
3: Restore all parameters to default (P.998=1)
4: Restore some parameters to default 1 (P.999=1)
5: Restore some parameters to default 2 (P.999=2)
6: Restore some parameters to default 3 (P.999=3)
00-03 P.77
Selection of parameters
write protection
0: Parameters can be written only when the motor stops.
0 48
1: Parameters cannot be written.
2: Parameters can also be written when the motor is
running.
3: Parameters cannot be read when in password
protection.
00-04 P.294 Password parameter 0~65535 0 48
00-05 P.295 Password setup 2~65535 0 48
00-06 P.110
Built-in keypad monitor
selection
0：When inverter starts, built-in keypad enters monitor
mode automatically, screen displays output frequency
(with slip compensation ).
2 50
1：When inverter starts, built-in keypad displays target
frequency.
2：When inverter starts, built-in keypad enters monitor
mode automatically, screen displays steady state output
frequency
3：When inverter starts, built-in keypad enters monitor
mode automatically, screen displays current pressure
and feedback pressure of the constant pressure system
in percentage
4：When inverter starts, built-in keypad doesn’t enter
monitor mode but enter the previous mode before power
off
5：When inverter starts, built-in keypad enters monitor
mode automatically, screen displays current pressure
and feedback pressure of the constant pressure system
00-07 P.161 Multi-function display
0: Output AC voltage (V)
0 50
1: DC bus voltage. (V)
2: Inverter temperature rising accumulation rate (%)
3: Target pressure of the constant pressure system (%)
4: Feedback pressure of the constant pressure system
(%)
5: Running frequency (Hz)
6: Electronic thermal accumulation rate (%)