Shihlin electric SL3 Series, Руководство пользователя

Страница: 166 / 211

Appendix 1 Parameter table
Appendix 162
Parameter
Number
Group Name Setting Range Default Page
P.59 00-10
Built-in keypad set target
frequency selection
X2XX: Every frequency change will not save
0 52
0XXX: Set frequency will work immediately when use
up down button on built-in keypad
1XXX: Set frequency will work after pressing SET
when use up down button on built-in keypad
P.60 02-10 Terminal 3-5 filter time 0～2000ms 31ms 78
P.61 10-11 Remote control function
0: Off
0 142
X1：Remote control function, frequency save in
memory
X2：Remote control function, frequency won’t save
X3：Remote control function, frequency won’t save,
clear frequency setting every time STF/STR “turn off”.
X4: Remote control function, frequency save in
memory every 5s
1X:Frequency command range
01-01(P.2)~01-00(P.1), frequency command value
from RH,RM setting
P.62 03-23
Zero current detection
level 0～200.0%
5.0% 96
99999: Off
P.63 03-24
Zero current detection
time
0.05～100.00s
0.50s 96
99999: Off
P.65 10-12 Auto reset function
0: Off.
0 144
1: When over-voltage, inverter will reset.
2: When over-current, inverter will reset.
3: When either over-voltage or over-current, inverter
will reset.
4: When any alarm occurs, inverter will reset.
P.66 06-03
Stall prevention operation
reduction starting
frequency 50Hz system: 0～599.00Hz 50.00Hz
108
60Hz system: 0～599.00Hz 60.00Hz
P.67 10-13 Auto reset times
0: Off.
0 144 1～10: If the alarm exceeds 10-13(P.67) times,
inverter will not reset.
P.68 10-14 Auto reset waiting time 0～360.0s 6.0s 144
P.69 10-15 Auto reset times count Read only 0 144
P.71 00-13 Idling brake / DC brake
0: Idling brake
1 55
1: DC brake
P.72 00-11 Carrier frequency 1~15 kHz 5 kHz 53
P.75 00-14 Stop function selection
0: Press STOP button and inverter stop running in PU
and H2 mode
1 55
1: Press STOP button and inverter stop running in all
mode.
P.76 02-62
Keypad knob on inverter
minimum value
0.00~599.00 Hz 0.00Hz 79