Shihlin electric SL3 Series, Руководство пользователя

Страница: 180 / 211

Appendix 1 Parameter table
Appendix 176
Group
Parameter
Number
Name Setting Range Default Page
00-07 P.161 Multi-function display
7：Reserved
0 50
8: Signal value (mA) of 3-5 input terminals (mA/V).
9: Output power (kW).
10：Reserved
11: Forward reverse rotation signal. 1: forward rotation
2: reverse rotation 0: stop.
12: NTC temperature (℃)
13：Motor electronic thermal accumulation rate (%)
14~18：Reserved
19: Digital terminal input state
20: Digital terminal output state
21: Actual working carrier frequency
00-08 P.37 Speed display
0：Display output frequency(not mechanical speed)
0.0 51 0.1~5000.0
1~50000
00-09 P.259
Speed display unit
selection 0: Speed display unit is 1
1 51
1: Speed display unit is 0.1
00-10 P.59
Built-in keypad set target
frequency selection
XXX0: Use up down button on built-in or external
keypad to set frequency
0 52
XXX1: Use keypad knob on external keypad to set
frequency
XXX2：Use keypad knob on built-in keypad to set
frequency
X0XX: Every frequency change will save after 30s
X1XX: Every frequency change will save after 10s
X2XX: Every frequency change will not save
0XXX: Set frequency will work immediately when use up
down button on built-in keypad
1XXX: Set frequency will work after pressing SET when
use up down button on built-in keypad
00-11 P.72 Carrier frequency 1~15 kHz 5 kHz 53
00-12 P.31
Soft-PWM carrier function
selection
0: Off
0 53
1: When 00-11(P.72)<5,Soft-PWM is on(only apply to
V/F control)
2：When 00-11(P.72)＞9, if the IGBT temperature is
high, carrier frequency will decrease automatically,
when temperature go back to normal, carrier frequency
go back to 00-11(P.72) value
00-13 P.71 Idling brake / DC brake
0: Idling brake
1 55
1: DC brake
00-14 P.75 Stop function selection
0: Press STOP button and inverter stop running in PU
and H2 mode
1 55
1: Press STOP button and inverter stop running in all
mode.