Shihlin electric SL3 Series, Руководство пользователя

Страница: 96 / 211

Digital input/ output parameter group 03
PARAMETER DESCRIPTION 94
5.4.4 Digital output signal delay

This parameter is used to delay and confirm the digital output signal. Delay time acts like confirmation time, which
can prevent some unknown interference.
Parameter Name Default Setting Range Content
03-16
P.120
Output signal delay time 0.0s 0～3600.0s ---
Output signal delay

When set 03-16(P.120)=0 and condition from 03-11 (P.85) is met, signal will output directly.

When set 03-16(P.120)＝0.1~3600 and condition from 03-11 (P.85) is met, signal will output after delay time.
5.4.5 Digital input signal filter

This parameter is used to set response time for digital input signals.
Parameter Name Default Setting Range Content
03-17
P.157 Digital input terminal
filter time
4 0～2000 ---
Digital input terminal filter

03-17 (P.157) is used to select the response time of the digital input terminal signal, the terminal includes: STR,
STF, M0, M1. The actual delay time is 03-17(P.157)*2ms, for example, when 03-17(P.157)=100, the actual delay
time is 200ms.
5.4.6 Digital input terminal enable when power on

Choose when power on if digital input terminal operates immediately.
Parameter Name Default Setting Range Content
03-18
P.158 Digital input terminal
enable when power on
0
0 When power on digital terminals work directly
1
When power on digital terminals work after switch off then
on
Digital input terminal enable when power on

If 03-18(P.158)=1, when terminal function STF, STR, RUN and MPO is already short before power on, after power
on inverter will not run immediately, inverter will run only after switch off then on these terminals. If 03-18(P.158)=0,
when terminal function STF, STR, RUN and MPO is already short before power on, after power on inverter will run
immediately
Setting
Setting
Setting