Shihlin electric SL3 Series, Руководство пользователя

Страница: 45 / 211

System parameter group 00
PARAMETER DESCRIPTION 43
Group
Parameter
Number
Name Setting Range Default Page
00-07 P.161
Multi-function
display
8: Signal value (mA) of 3-5 input terminals (mA/V).
0
50
9: Output power (kW).
10：Reserved
11: Forward reverse rotation signal. 1: forward rotation 2:
reverse rotation 0: stop.
12: NTC temperature (℃)
13：Motor electronic thermal accumulation rate (%)
14~18：Reserved
19: Digital terminal input state
20: Digital terminal output state
21: Actual working carrier frequency
00-08 P.37 Speed display
0：Display output frequency(not mechanical speed)
0.0
52 0.1~5000.0
1~50000
00-09 P.259
Speed display unit
selection
0: Speed display unit is 1
1
52
1: Speed display unit is 0.1
00-10 P.59
Built-in keypad set
target frequency
selection
XXX0: Use up down button on built-in or external keypad to
set frequency
0
53
XXX1: Use keypad knob on external keypad to set frequency
XXX2：Use keypad knob on built-in keypad to set frequency
X0XX: Every frequency change will save after 30s
X1XX: Every frequency change will save after 10s
X2XX: Every frequency change will not save
0XXX: Set frequency will work immediately when use up
down button on built-in keypad
1XXX: Set frequency will work after pressing SET when use
up down button on built-in keypad
00-11 P.72 Carrier frequency 1~15 kHz
5 kHz
54
00-12 P.31
Soft-PWM carrier
function selection
0: Off
0
54
1: When 00-11(P.72)<5,Soft-PWM is on(only apply to V/F
control)
2：When 00-11(P.72)＞9, if the IGBT temperature is high,
carrier frequency will decrease automatically, when
temperature go back to normal, carrier frequency go back to
00-11(P.72) value
00-13 P.71
Idling brake / DC
brake 0: Idling brake
1
55
1: DC brake
00-14 P.75
Stop function
selection
0: Press STOP button and inverter stop running in PU and H2
mode
1
55
1: Press STOP button and inverter stop running in all mode.