Shihlin electric SL3 Series, Руководство пользователя

Страница: 126 / 211

Communication parameter group 07
PARAMETER DESCRIPTION 122
Normal response
Mode Start Address*1) Function*2) Start Address*3) Number of register *4) Check Stop
ASCII H3A 2char 2char 4char 4char 2char 0D 0A
RTU >=10ms 8bit 8bit 2byte 2byte 2byte >=10ms
Message
Content
*1)Address Set the address for sending information
*2)Function code H10
*3)Start address Set as the start address for the register that needs to be written
*4) Number of registers Sets the number of registers written. The maximum number is 20.
*5) Number of data Setting range is 2~24. Set 2 times the value specified in *4).
*6) Write data
Set data division specified in *4). Write data is set in the order of high byte to low byte. Setting is
performed in the order of starting address data, starting a1 data, starting a2 data ...
4. Function diagnosis (H08)
In order to send the query information, the query information (function of subfunction code H00) is returned as it is, and
communication check can be performed.
Sub-function code H00 (return of query data)
The query information
Mode Start Address*1) Function*2) Subroutine *3) Data *4) Check End
ASCII H3A 2char 2char 4char 4char 2char 0D 0A
RTU >=10ms 1byte 1byte 2byte 2byte 2byte >=10ms
Normal response
Mode Start Address*1) Function*2) Sub-function *3) Data *4) Check End
ASCII H3A 2char 2char 4char 4char 2char 0D 0A
RTU >=10ms 1byte 1byte 2byte 2byte 2byte >=10ms
Query information setting
Message
Content
*1)Address Set the address for sending information, but be unable to broadcast communication (0 is invalid)
*2)Function code H08
*3)Sub-function code H0000
*4)Data The data can be set arbitrarily if the length is 2 byte. Set range is H0000~HFFFF.
Error response
If error is contained in the function/address/data received from the device, do function diagnosis;
However, when using function code H03 or H10 to access more than one address, if one or more data can still operated, it will
not be seen as an error.
Mode Start Address*1)
Function*2)
H80+function
Error code * 3) Check End
ASCII H3A 2char 2char 2char 2char 0D 0A
RTU >=10ms 8bit 8bit 8bit 2byte >=10ms