Shihlin electric SL3 Series, Руководство пользователя

Страница: 51 / 211

System parameter group 00
PARAMETER DESCRIPTION 49
00-16 P.79 Operation mode selection

When running, the parameters below can be written.（00-03(P.77)=“2”）
Exception
When running, the parameters below cannot be written:
Group No. Name Group No. Name
00-00 P.90 Inverter model 06-27 P.292 Total inverter operation time (minutes)
00-01 P.188 Firmware version 06-28 P.293 Total inverter operation time (days)
00-11 P.72 Carrier frequency 06-41 P.289 Alarm record code display
00-15 P.78 Prevent forward/reverse rotation selection 06-43 P.291 Alarm record message display
00-16 P.79 Operation mode selection 06-29 P.296 Total inverter power on time (minutes)
00-19 P.35 Communication mode selection 06-01 P.22 Stall prevention operation level
06-30 P.297 Total inverter power on time (days) 06-08 P.155 Over torque detection level

When in password protection, parameters cannot be read.（00-03(P.77)=“3”）
Exception
Parameters below can still be read:
Group No. Name
00-00 P.90 Inverter model
00-01 P.188 Firmware version
00-04 P.294 Password parameter
00-05 P.295 Password setup
00-08 P.37 Speed display
00-10 P.59 Keypad knob value lock selection
00-16 P.79 Operation mode selection
00-25 P.990 Parameter display mode setting
01-00 P.1 Maximum frequency
01-01 P.2 Minimum frequency
02-21 P.39 Terminal 3-5/ keypad knob maximum operation frequency
06-41 P.289 Alarm record code display
06-43 P.291 Alarm record message display
Password protection

Register a password
1.
Write a number (2～65535) in 00-05(P.295) as a password, password protection takes effect immediately;
2. After registering a password,00-05(P.295)=1;

Unlock password protection
1. Write the correct password in 00-04(P.294), and then password protection will be unlocked;
2. After unlocking the password, 00-04(P.294)=0, 00-05(P.295)=1;
3. If turn the power off and then turn on, inverter will still restore to the password protection status.

Password all clear
1. Write the correct password in 00-04(P.294) to unlock the password protection;
2. Write 0 in 00-05(P.295), password will be all cleared.
Note: If password is forgotten, enter the same incorrect password three times in 00-04(P.294), and the interval between
two consecutive times is not more than 10s. The password can be cleared and the user parameters will be
automatically restored to default.
Setting