Shihlin electric SL3 Series, Руководство пользователя

Страница: 152 / 211

Application parameter group 10
PARAMETER DESCRIPTION 148
Triangular wave function

If 10-23(P.234) set to 1, triangular wave function will be on when terminal function TRI is triggered. Please set one
of 03-00(P.83)、03-01(P.84)、03-03(P.80)、03-04(P.81) as “36”, and then give TRI signals to the digital input
terminal.

If 10-23(P.234) set to 2, triangular wave function will be on all the time.
f0
f1
f1
f2
f3
Triangular wave operation
Run
signal
TRI signal
Time
10-28
（
P.239
）
f0: Frequency set
f1:Generated amplitude from
frequency set
f2: Compensation for switching from
acceleration to deceleration
f3: Compensation for switching
from deceleration to
acceleration
(f1× 10-26(P.237))
O
ut
pu
t
fre
qu
en
cy
10-27
（
P.238
）
(f0× 10-25(P.235))
(f1× 10-25(P.236))
01-06
（
P.7
）
01-07
（
P.8
）
01-06
（
P.7
）
Note: 1. Output frequency is limited by the upper and lower frequency limits in triangular wave operation.
2. If the values of amplitude compensation 10-25(P.236) and 10-26(P.237), are too large, overvoltage trip and
stall prevention protection will trigger.
5.10.11 Voltage stall action level

This parameter is used to set the voltage stall action discrimination level
Parameter Name Default Setting Range Content
10-46
P.268
Voltage stall level
380V 155～400V 220V model
760V 310～800V 440V model
Voltage stall action level

When the inverter's DC bus voltage is higher than the setting of 10-46 (P.268), the inverter is in voltage stall state.
5.10.12 Reciprocating machine function

Special functions for reciprocating machine according to customer needs.
Parameter Name Default Setting Range Content
10-55
P.226 Reciprocating machine
function selection
0
0 Off
1 Turn on reciprocating machine function
10-56
P.227 Reciprocating forward
limit time
0.0s 0～3600.0s
Run forward for more than 10-56 (P.227) time, inverter will
decelerate to stop. When set to 0, this function is invalid.
10-57
P.228 Reciprocating reverse
limit time
0.0s 0～3600.0s
Run reverse for more than 10-57(P.228) time, inverter will
decelerate to stop. When set to 0, this function is invalid.
Reciprocating machine function
Setting
Setting
Setting