Shihlin electric SL3 Series, Руководство пользователя

Страница: 81 / 211

Analog input and output parameter group 02
PARAMETER DESCRIPTION 79
5.3.3 Terminal 3-5 signal selection and processing

Select terminal 3-5 signal specification and frequency compensation function.
Parameter Name Default Setting Range Content
02-10
P.60
Terminal 3-5 filter time 31ms 0～2000ms ---
02-20
P.17
Terminal 3-5 signal range
selection
1
0 Signal sampling range from 4~20mA.
1 Signal sampling range from 0～10V.
2 Signal sampling range from 0～5V.
02-21
P.39
Maximum operation
frequency (Terminal 3-5
input / built-in keypad knob) 50.00Hz
1.00～599.00Hz
50Hz system (00-24(P.189)=1)
60.00Hz 60Hz system (00-24(P.189)=0)
02-24
P.184 Terminal 3-5 disconnect
selection
0
0 Off
1
Inverter decelerates to 0Hz, multi-function digital
output terminal set off alarm
2
Inverter stops immediately, and keypad displays
“AErr” alarm
3
Inverter runs continuously according to the
frequency command before disconnection. Digital
output terminal will set off alarm.
02-25
P.198 Terminal 3-5 minimum input
current/ voltage
0.00V 0～20.00mA/V ---
02-26
P.199 Terminal 3-5 maximum input
current/ voltage
10.00V 0～20.00mA/V ---
02-27
P.196
Percentage corresponds to
terminal 3-5 minimum input
current/ voltage
0.0% 0%～100.0% ---
02-28
P.197
Percentage corresponds to
terminal 3-5 maximum input
current/ voltage
100.0% 0%～100.0% ---
02-61
P.141
Polarity of percentage
corresponds to terminal 3-5
current/ voltage signal
0 0~11 ---
02-62
P.76
Keypad knob on inverter
minimum value
0.00Hz 0.00~599.00 Hz
Terminal 3-5 signal selection, maximum input, Keypad knob maximum input

The setting value of 02-21 (P.39) is the target frequency value of the inverter when the input signal of terminal 3-5
is at 20mA (5V/10V) or the knob of the inverter is turned to the maximum.
Setting