SPB-ENJOY-600 Installation
CFB2
10W Battery
Maintainer
DC-3500-KIT
Battery
AC
Input
EVO-RC-PLUS
Remote
AC Distribution
Panel
(Not included)
200W Solar Panels
EVO-30AB
Solar Charge
Controller
EVO-3012
EQUALIZATION
Push & Hold 5 sec: Start
Push & Hold 2 sec: Stop
PV+
PV –
BAT+
BAT–
BTS+
BTS –
Bulk/Absorption
Float
Equalization
Temp Fault
Fault
STATUS
Model
EVO-30AB
PWM Solar
Charge Controller
2x
SBC-2-DC
ATC
Inline Fuse
20’ of #12 AWG Cable
supplied with each
Solar Panel Kit
Cable set with
ATC-30A Fuse,
5’ #10 AWG
Toll Free Numbers
Ph: 1 800 561 5885
Fax: 1 888 814 5210
Local Numbers
Ph: 604 525 3836
Fax: 604 525 5221
samlexamerica.com
USA Shipping Warehouses
Kent, WA
Plymouth, MI
Canadian Shipping Warehouse
Richmond, BC
11013-SPB-Installation Guide-0823
Contact Information
SOLAR POWER BUNDLES |
Installation Guide
Installation
Guide
Solar + Power
Bundles
Models:
SPB-EXPLORE200
SPB-SHARE400
SPB-ENJOY600
Thank you for purchasing the Samlex Solar Power Bundle. We know you will enjoy many years of great service
from this quality state-of-the-art product. Samlex Customer Service and Application Engineers are available to
assist you with installation, setup, or operating instructions.
The Solar Power Bundle is highly configurable for many different and specific applications. To get you up and
running quickly, we have created this simple overview Reference Guide to assist you with the basic setup
procedures so that you may later configure for your specific needs.
Install Instructions
Read all Manuals prior to Install
1. Check all materials in your kit
2. Plan your system
• Location for all products
- Cable and connections between all products
- Refer to wiring diagram
3. Install Solar Panels
4. Install Charge Controller
5. Install Inverter
6. Install Fuse
7. Install Transfer Switch - Electrician required to conduct work
WARNING!
• If there are any items of the Reference Manual that you do not understand, do not attempt to install the unit
yourself. For a safe and code compliant installation, consult a Certified Electrician that is familiar with Local and
National electrical codes, proper installation of solar panels, and the design of alternative energy systems.
• All electrical systems both DC and AC must be disconnected from the source during the installation.
• Use of insolated tools is recommended.
