Shihlin electric SL3 Series, Руководство пользователя

Страница: 148 / 211

Application parameter group 10
PARAMETER DESCRIPTION 144
5.10.6 Auto reset function

This function allows inverter to reset itself and restart when alarm occurs. Choose which alarm to reset.
Parameter Name Default Setting Range Content
10-12
P.65
Auto reset function 0
0 Off.
1 When over-voltage, inverter will reset.
2 When over-current, inverter will reset.
3 When either over-voltage or over-current, inverter will reset.
4 When any alarm occurs, inverter will reset.
10-13
P.67
Auto reset times 0
0 Off.
1～10 If the alarm exceeds 10-13(P.67) times, inverter will not reset.
10-14
P.68
Auto reset waiting
time
6.0s 0～360.0s ---
10-15
P.69
Auto reset times
count
0 Read only ---
Auto reset function

After alarm occur, inverter returns to the state before alarm, which is called “auto reset”.

The auto reset of inverter is conditional. If alarm occurs and inverter auto reset, but the alarm occurs again within
the time (10-14(P.68)*5), then this type of alarm is called “continuous alarm”. If the continuous alarm exceeds a
certain number of times, it means that there is a major fault, and this number is called “Auto reset times (10-13)
(P.67)". At this time, inverter will no longer perform auto reset, and need manual troubleshooting by user.

If all alarms do not belong to “continuous alarm”, inverter can perform auto reset for an unlimited number of times.

The time between the occurrence of alarm and auto reset is called “Auto reset waiting time”.

For each auto reset, 10-15(P.69) value will automatically add 1. Therefore, 10-15(P.69) value read from memory
represents the number of auto reset.

If set parameter 10-15(P.69)=0, auto reset times can be cleared.
Note: The inverter will perform retry only after the retry waiting time of 10-14(P.68). Therefore when using this function,
please be aware of the possible danger when operating the inverter.
Setting