manualshive.com logo in svg

SCIEX TripleTOF 5600, Руководство пользователя системы

Поделиться
Скачать
SCIEX TripleTOF 5600 Скачать руководство пользователя страница 97

• Lint-free wipes. Refer to 

Tools and Supplies Available from the Manufacturer on page 97

.

• (Optional) Polyester (poly) swabs

Tools and Supplies Available from the Manufacturer

Part Number

Description

1017396

Small poly swab (thermally bonded). Also available in the Cleaning kit.

018027

Lint-free wipe (11 cm x 21 cm, 4.3 inches x 8.3 inches). Also available in the Cleaning
kit.

5020763

Cleaning kit. Contains the small poly swab, lint-free wipes, Q0 cleaning tool, tapered
QJet

®

 ion guide cleaning brush, and Alconox packets.

Cleaning Best Practices

WARNING! Hot Surface Hazard. Let the ion source cool for at least 30 minutes
before starting any maintenance procedures. Surfaces of the ion source and
the vacuum interface components become hot during operation.

WARNING!  Toxic Chemical Hazard. Refer to the chemical product Safety Data Sheets
and follow all of the recommended safety procedures when handling, storing, and
disposing of chemicals. For health and safety precautions, refer to the System User
Guide.

WARNING!  Ionizing Radiation Hazard, Biohazard, or Toxic Chemical Hazard.
Determine whether decontamination is required prior to cleaning or
maintenance. The customer must decontaminate the system prior to cleaning
or maintenance if radioactive materials, biological agents, or toxic chemicals
have been used with the system.

WARNING! Environmental Hazard. Do not dispose of system components in municipal
waste. Follow local regulations when disposing of components.

• Allow the ion source to cool before removing it.

• Always wear clean, powder-free gloves (nitrile or neoprene recommended) for the cleaning procedures.

• After cleaning the mass spectrometer components, and before reassembling them, put on a new, clean pair

of gloves.

TripleTOF

®

 5600/5600+ System

System User Guide

97 / 131

RUO-IDV-05-7040-B

Service and Maintenance Information

Содержание TripleTOF 5600




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды