manualshive.com logo in svg

SCIEX TripleTOF 5600, Руководство пользователя системы

Поделиться
Скачать
SCIEX TripleTOF 5600 Скачать руководство пользователя страница 100

Figure 10-3 Curtain Plate Removal

The curtain plate is held in place by three retaining ball catches mounted on the orifice plate.

Tip! 

If the curtain plate does not immediately separate from the orifice plate, then turn the curtain plate

slightly (less than 90 degrees) to release the ball spring latches.

2. Dampen a lint-free wipe with pure water and then clean both sides of the curtain plate.

Note: 

Use multiple wipes, as required.

3. Repeat step 

 2

 using the cleaning solution.

4. Using a dampened wipe or small poly swab, clean the aperture.

5. Wait until the curtain plate is dry.

6. Inspect the curtain plate for solvent stains or lint, removing any residue with a clean, slightly damp, lint-free

wipe.

Note: 

Persistent spotting or filming is an indicator of contaminated solvent.

System User Guide

TripleTOF

®

 5600/5600+ System

RUO-IDV-05-7040-B

100 / 131

Service and Maintenance Information

Содержание TripleTOF 5600




































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды