Figure 8-3 Add Sample Dialog
5. In the
Sample name
section, in the
Prefix
field, type a name for the samples in this set.
6. To add incremental numbering to the end of the sample name, select the
Sample number
check box.
7. If the
Sample number
check box is selected, then in the
Number of digits
field, type the number of
digits to include in the sample name.
For example, if 3 is typed, then the sample names would be samplename001, samplename002, and
samplename003.
8. In the
Data file
section, in the
Prefix
field, type a name for the data file that will store the sample information.
9. Select the
Set name
check box to use the set name as part of the data file name.
10. Select the
Auto Increment
check box to increment the data file names automatically.
Note:
The data for each sample can be stored in the same or a separate data file. The names of the data
file will have numerical suffixes starting from 1.
11. Type a name in the
Sub Folder
field.
The folder is stored in the Data folder for the current project. If the
Sub Folder
field is left blank, then the
data file is stored in the
Data
folder and a subfolder is not created.
TripleTOF
®
5600/5600+ System
System User Guide
63 / 131
RUO-IDV-05-7040-B
Operating Instructions — Batches
