9. Select the
Continue Whole Batch if Missing Sync found
check box to continue acquiring the whole
batch when a missing sync signal is encountered. If this check box is not selected, then the current sample
fails and the queue does not proceed to the next sample when this signal is encountered.
Add Sets and Samples to a Batch
A set can consist of a single sample or multiple samples.
Note:
For more information about adding quantitation information to a batch, refer to the
Advanced User
Guide
.
1. On the Navigation bar, under
Acquire
, double-click
Build Acquisition Batch
.
Figure 8-2 Batch Editor Dialog
2. In the Sample tab, in the
Set
list, type a name.
3. Click
Add Set
.
4. Click
Add Samples
to add samples to the new set.
System User Guide
TripleTOF
®
5600/5600+ System
RUO-IDV-05-7040-B
62 / 131
Operating Instructions — Batches
