27
4. Input Function Parameters
Set during running available
Paramet
er
Parameter functions
Setting range
Factory
setting
4-09
Speed tracking after external alarm
reset
0:Tracking downwards from speed before
external alarm
1:Tracking upwards from min speed
0
4-10~4.22
Reserved
Parameters marked with “reserved” will be displayed, but will not be used for the inverter. Please do not change the
code of such kind of parameter.
Notes: When 4-04 is set as d1~d2, function set by REV is invalid. When 4-04 is set as d3
～
d4, function set by REV
and MI3 is invalid.
5. Multi-step Speed and Pattern Operation Parameters
Set during running available
Parame
ter
Parameter functions
Setting range
Factory
setting
5-00
Multi frequency 1
0.0 to 400Hz
0.0
5-01
Multi frequency 2
0.0 to 400Hz
0.0
5-02
Multi frequency 3
0.0 to 400Hz
0.0
5-03
Multi frequency 4
0.0 to 400Hz
0.0
5-04
Multi frequency 5
0.0 to 400Hz
0.0
5-05
Multi frequency 6
0.0 to 400Hz
0.0
5-06
Multi frequency 7
0.0 to 400Hz
0.0
5-07~5-14
Reserved
5-15
Pattern Operation(Mode)
0. Pattern operation inactive
1. Active (Stop after operating for 1 cycle)
2. Active (Pattern operation performs in cycles
until STOP command input)
3. Active (Stop after operating for 1 cycle) (with
STOP intervals).
4. Active (Pattern operation performs in cycles
until STOP command input) (with STOP
intervals).
0
5~16
(Rotating Operation) (0 to 7
th
step
speed)
0 to 255( 0: Forward Run 1: Reverse Run)
0
5-17
Reserved
5-18
(Step 0 Time)
0 to 65500S
0
5-19
(Step 1 Time)
0 to 65500S
0
5-20
(Step 2 Time)
0 to 65500S
0
5-21
(Step 3 Time)
0 to 65500S
0
5-22
(Step 4 Time)
0 to 65500S
0
5-23
(Step 5 Time)
0 to 65500S
0
5-24
(Step 6 Time)
0 to 65500S
0
5-25
(Step 7 Time)
0 to 65500S
0
5-26~5-33
Reserved
Parameters marked with “reserved” will be displayed, but will not be used for the inverter. Please do not change the
code of such kind of parameter.
