SANCH S900 Series, Руководство пользователя

Страница: 50 / 79

48
Function List
Set value Function Set
value Function
d 0 No function d 16 bb, normally closed(NC) input
d 1 MI1: forward run/stop, MI2: reverse
run/stop d 17 UP COMMAND
d 2 MI1: run/stop, MI2: fwd/rev d 18 DOWN COMMAND
d 3 Three line operation control(1): MI1
run,
MI2 fwd/rev run, MI3
STOP(Normally closed)
d 19 Program auto- operation reference
d 4 Three line operation control(1): MI1 run
(Triggering), MI2 run(Triggering), MI3
STOP(Normally closed) d 20 Auto-program operation pause
d 5 EF, normally open interface input (N.O) d 21 JOG frequency reference
d 6 EF, normally closed interface input
(N.C) d 22 Count reset
d 7 RESET reference d 23 Reserved
d 8 Multi-step speed Reference 1 d 24 JOG-FWD
d 9 Multi-step speed Reference 2 d 25 JOG-REV
d 10 Multi-step speed Reference 3 d 26 Reserved
d 11 Reserved d 27 Wobble frequency function input
d 12 frequency switch function d 28 Wobble frequency state reset
d 13 Accel/decel inhibition reference d 29 Inhibiting output (N.C)
d 14 Switching of 1
ST
and 2
nd
Accel/Decel
time
d 30 Inhibiting output (N.C)
d 15 bb, normally open (NO) input d 31 counter trigger signal input
Explanation of functions:

No function (d0):
Description of action: No function terminal is set to isolate the external terminals, which shall be free
from fault action in unclear cause.

Operational terminals setting for external terminals (d1, d2, d3 and d4)
Two line operation control 1 (d1): Controlling parameter 4-04, terminal MI1 and MI2, in which MI1:
forward run/stop, MI2: reverse run/stop. When 4-04 is set as 1, function set by MI2 is invalid.
Two line operation control 2 (d2): Controlling parameter 4-04, terminal MI1 and MI2, in which MI1:
forward run/stop, MI2: reverse run/stop. When 4-04 is set as 2, function set by MI2 is invalid.
Three line operation control 1 (d 3): Controlling parameter 4-04, terminal MI1, MI2 and MI3, in which
MI1 run, MI2 fwd/rev run, MI3 STOP(Normally closed). When 4-04 is set as 3, function set by MI2
and MI3 is invalid. The wiring diagram is as follows.
Three Line Control (1)
上图中英对照：
运转：
FWD(running)
停止：
EF( stops)
（正转
/
反转） ：
REV (fwd/rev run)
公共端：
DCM (terminal common)
闭：运转，
CLOSED: run
开：停止，
OPEN: stops
闭合：反转，断开：正转：
CLOSED: reverse run, OPEN: forward run