44
3-07
Reserved
3-08
Analog output gain selection
Factory setting
100
Setting range 1~200%
This parameter adjusts voltage level of AC motor drive analog signal output terminal AFM output to
analog meter head.
3-09
Multifunctional Output Terminal 1(MO1)
Factory setting
1
Setting range
0: no function
1: Reference during operation
2: Reference for set frequency agreement
3: Zero-speed reference
4: Over torque detection reference
5: Reference during BB
6: Reference for low voltage detection
7: AC Motor driver operation mode
8: Fault reference
9: Any frequency reaching indication
10: automatic operation indication
11: stage one operation finished
12: automatic operation finished
13: automatic operation pause
14: reach setting counting
15: reach specified counting
16: driver preparation finished
17: forward direction indication
18: reverse direction indication
19: forward/reverse direction indication
This function corresponds to external terminal MO1-DCM (open-collector output). Different system
signals output can be obtained if set value of 3-09 as per above table. The function description is
same to that in 3-05.
3-10
Reserved
3-11
CW/CCW rotation dead zone time setting
Factory setting
d 0.0
Setting range
d 0.0 <-> d 600
Unit
0.1
3-12
Cooling fan control
Factory setting
d 0
Setting
range
d 0
0: fan continuous running
d 1
1: run for 1 minute after pressing stop key
d 2
2: operate/stop along with diver
This parameter determines the action mode of cooling fan.
