26
4 Input Function Parameters
Set during running available
Parameter
Parameter functions
Setting range
Factory setting
4-00
VR Analogue input frequency
deviation
0.0-350Hz
0.0
4-01
VR
Deviation adjustment
direction
0: positive direction
1: negative direction
0
4-02
VR Input frequency increase
1-200%
100
4-03
VR Negative pressure operation
setting
0: no negative bias
0
1: reversible negative bias
2: not reversible negative bias
4-04
Multifunctional input Option
1(MI1)
(Setting range from d0 to d31)*
0: No function
1
1: MI1: forward run/stop, MI2: reverse run/stop
2: MI1: run/stop, MI2: fwd/rev run
3: Three line operation control(1): MI1 run, MI2
fwd/rev run, MI3 STOP(Normally closed)
4:Three line operation control(2): MI1 run
(Triggering),
MI2
run(Triggering),
MI3
STOP(Normally closed)
4-05
Multifunctional input Option
2(MI2)
(Setting range d0, d5 to d31)
5: EF, normally open interface input (N.O)
0
6: EF, normally closed interface input (N.C)
7: RESET reference
8: Multi-step speed Reference 1
4-06
Multifunctional input Option
3(MI3)(Setting range d0, d5 to
d31)
9: Multi-step speed Reference 2
8
10: Multi-step speed Reference 3
11: Reserved
12: frequency switch function
4-07
Multifunctional input Option
4(MI4)(Setting range d0, d5 to
d31)
13: Accel/decel inhibition reference
9
14: Switching of 1
ST
and 2
nd
Accel/Decel time
15: bb, normally open (NO) input
16: bb, normally closed(NC) input
4-08
Multifunctional input Option
5(MI5)
(Setting range d0, d5 to d31)
17: UP COMMAND
7
18: DOWN COMMAND
19: Auto-program operation performance
20: Auto-program operation pause
21: JOG frequency reference
22: Count reset
23: Reserved
24: JOG-FWD
25: JOG-REV
26: Reserved
27: Wobble frequency function input
28: Wobble frequency state reset
29: Inhibiting output (N.C)
30 :Inhibiting output (N.C)
31: counter trigger signal input
