19
3.3 PRELIMINARY OPERATION-NOT CONNECTING WITH MOTOR
Prior to connecting power supply with AC motor drive, check and make sure that AC power supply
voltage is within input voltage range of the drive.
Connect power supply to L1/R,L2/S and L3/T input terminals of the AC motor drive.
Operation mode control selection
The operation mode can be divided into the following categories:
□
operation command is controlled by keyboard.
(2-03=d0) (Factory setting)
□
Operation command is controlled by external terminals, STOP key on keyboard is valid.
Two line operation control, “FWD/STOP” and “REV/STOP”
(2-03=d1, 4-04=d1)
□
Operation command is controlled by external terminals, STOP key on keyboard is valid.
Two line operation control, “FWD / REV” and “OPERATION/STOP” control configuration.
(2-03=d1, 4-04=d2)
