Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1074 / 1191

S2600E CLI Reference Guide Chapter 7 SEM Configuration Commands
7.1.15 event sysmon
This command is used to configure a system resource monitor in SEM
configuration mode. The no form of this command is used to delete an event
with the specified name.
event tag event-name [ correlate { andnot | and | or }] sysmon type { cpu
{ system | task task-name } | memory { system-use | system-free | task
task-name} { percent | absolute }} entry-op operator entry-val entry-value
poll-interval poll-int-value [ exit-op operator exit-val exit-value ] [ slot { slot-num
| slave [ subsystem subsystem-id ]}]
no event tag event-name
Parameter Description
event-name The event name.
correlate
{ andnot | and |
or }
The relation between the current
event and the combination of the
previous events in the case of
multiple events (optional). The values
are and, or, and andnot.
cpu {system |
task task-name}
Monitor the CPU ultization by the
system or a certain task.
memory
{system-use |
system-free |
task task-name }
Monitor the memory utilization and
free memory of the system or a
certain task
entry-op operator
The method that triggers comparison:
eq: equal to
ge: greater than or equal to
gt: greater than
le: less than or equal to
lt: less than
ne: unequal to
entry-val
entry-value
The value that triggers comparison.
poll-interval
poll-int-value
The comparing interval. By default, it
is 5s.
Parameter
description
exit-op operator The method to recover comparison
(optional):
eq: equal to
ge: greater than or equal to