Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 625 / 1191

S2600E CLI Reference Guide Chapter 5 Web Authentication Configuration Commands
5.1.5 http redirect port
This command is used to redirect users’ HTTP redirection request to a
certain destination port. The no form of this command is used to cancel
HTTP redirection of the request to a certain destination port.
http redirect port port-num
no http redirect port port-num
Parameter Description
Parameter
Description
port-num Destination port of the HTTP request
Default
Configuration
The HTTP packets of users to port 80 are intercepted.
Command
Mode
Global configuration mode
Use Guide
When you access the network resource, you send HTTP packets.
The access device can intercept such HTTP packets to detect your
access. If the access device detects that an unauthenticated user is
accessing the network resource, it stops the users with an
authentication page.
By default, the access device intercepts users’ HTTP packets with
port 80 to check whether they are accessing network resources.
This command is used to change the destination port of HTTP
packets that are intercepted by the access device.
Up to 10 ports can be configured, including port 80.
Configuration
Example
Example 1: Redirect users’ HTTP requests with port 8080.
Ruijie(config)# http redirect port 8080
Example 2: Do not redirect users’ HTTP requests with port 80.
Ruijie(config)# no http redirect port 80