Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1064 / 1191

S2600E CLI Reference Guide Chapter 7 SEM Configuration Commands
skip { yes | no }
(Optional ) it determines whether to
skip this command, this function is
used only in the asynchronous
condition and it is no by default.
default wait-time
(Optional ) maximum time of
command line waiting for the end of
policy running, it is used on
condition that the command line
synchronizes with policy. 30
seconds by default.
mode variable
(Optional ) match the command
mode, all modes are matched by
default.
occurs
num-occurrences
(Optional ) the matching times which
is needed for triggering Event. It is 1
by default.
period
period-value
(Optional ) invalid period of occurs
command, the duration of occurs
operation over the period-value will
be considered as time-out. This
parameter is invalid when the occurs
is 1.
Default
configuration By default, no event is configured.
Command
mode SEM configuration mode
Usage
Guideline
The reference command used to pattern commands is a
command line, instead of the short form. For example, to
pattern write memory, you an enter write memory or write
mem.
When option sync is set to yes, the command line does not
respond until the policy execution completes. If the returned
value is not 0, the command will be executed normally. If the
returned value is 0, the command will not be executed.
When option sync is set to no, option skip is available. If you
set skip to no, the command will be executed normally. If you