Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1032 / 1191

S2600E CLI Reference Guide Chapter 6 GRTD Configuration Commands
6.2.3 diagnostic start
Use this command to start command line tests.
diagnostic start [ slot slot_id [ sub_system subsys_id ]] test { all | test-id |
range test-range }
Parameter Description
slot slot_id Slot ID
sub_system
subsys_id
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
Parameter
description
test { all |
test-id |
range
test-range }
Test items. all means all items; range means a
range, for example, from item m to item n.
Default
This command has no default setting.
Command
mode
Privileged mode
Usage
guidelines
Use the diagnostic start command to start command line tests.

Generally, in command line tests, non-destructive tests are
conducted before destructive tests.

Store tests on a slot need to be conducted those on a
management board, because, after store tests on a
management board are conducted, the management board
needs to be reset to make the system be used normally.
Caution
Before command line tests
are started, you need to
stop system health
monitoring tests and
planned tests about to be
conducted.
Examples
Example 1: The following example starts the tests for all test items
of slot 2.