Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1019 / 1191

S2600E CLI Reference Guide Chapter 6 GRTD Configuration Commands
6.1.4 diagnostic monitor active
Use this command to set the health monitoring test status for a test item of a
particular management board or slot in global configuration mode: active or
inactive .
diagnostic monitor active [ slot slot_id [ sub_system subsys_id ]] test { all |
test-id | range test-range }
no diagnostic monitor active [ slot slot_id [ sub_system subsys_id ]] test
{
all | test-id | range test-range
}
Parameter Description
slot slot_id Slot ID
sub_system
subsys_id
(Optional) Subsystem ID (value range: 0-1), whose
meaning is equivalent to cpu id in the show version
command.
Parameter
description
test { all |
test-id |
range
test-range }
Test items. all means all items; range means a
range, for example, from item m to item n.
Default Active
Command
mode
Global configuration mode
Usage
guidelines
Use the diagnostic monitor active command to set the health
monitoring test status for a test item of a particular management
board or slot.

You can set the health monitoring test status for a test item of a
particular management board or slot to active or inactive .
Caution
The health monitoring test status for a
destructive test cannot be set to active . You
can view the attributes of test items of slots or
management boards by using the show
diagnostic content command.
Examples
Example 1: The following example sets the health monitoring test