Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 786 / 1191

S2600E CLI Reference Guide Chapter 15 NFPP Configuration Commands
than 1000 and it will prompt the message that
%ERROR
：
The
value that you configured is smaller than current
monitored hosts 1000, please clear a part of monitored
hosts.
to remind the administrator of the invalid
configuration and removing the monitored hosts.
When the maximum monitored host number has been
exceeded, it prompts the message that
%
NFPP_ARP_GUARD-4-SESSION_LIMIT: Attempt to exceed limit
of 1000 monitored hosts.to
remind the administrator.
Examples
Ruijie(config)# nfpp
Ruijie(config-nfpp)# arp-guard monitored-host-limit 200
Command Description
Related
commands
show nfpp arp-guard
summary
Show the configurations.
15.2.6 arp-guard rate-limit
Use this command to set the arp guard rate limit.
arp-guard rate-limit {per-src-ip | per-src-mac | per-port} pps
Parameter Description
per-src-ip
Set the rate limit for each source IP
address.
per-src-mac
Set the rate limit for each source MAC
address.
per-port
Set the rate limit for each port.
Parameter
description
pps
Set the rate limit, in the range of
[1,9999]
Default
Settings
The default rate limit for each source IP address and MAC
address is 4pps; the default rate limit for each port is
100pps.
Command
mode NFPP configuration mode.