Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 673 / 1191

S2600E CLI Reference Guide Chapter 7 Port-based Flow Control Configuration Commands
Command
mode Interface configuration mode.
Usage
guidelines N/A
Examples
1.This example shows how to bind the IP address 192.168.1.100 on
the interface g 0/10:
Ruijie(config)# inter g0/10
Ruijie(config-if)# switchport port-security binding
192.168.1.100
2.This example shows how to bind the IP address
192.168.1.100 and MAC address 00d0.f800.5555 w ith vlan id
1 on the interface g 0/10
Ruijie(config)# inter g0/10
Ruijie(config-if)# switchport port-security binding
00d0.f800.5555 vlan 1 192.168.1.100
Command Description
show port-security
Show port security settings.
switchport
port-security
Enable the port-security.
switchport
port-security
binding interface
Configure the secure address binding
in the privileged mode.
Switchport
port-security
mac-address
Set the static secure address.
Related
commands
switchport
port-security
aging
Set the aging time for secure
address.
7.1.6 switchport port-security
binding interface
Use this command to configure secure address binding manually in the privileged mode
through performing the source IP address plus source MAC address binding or only the source
IP address binding. With this binding configured, only the packets match the binding secure
address could enter the switch, others will be discarded. Use the no form of the command to
remove the binding addresses