Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 193 / 1191

S2600E/P CLI Reference Guide Chapter 10 MSTP Configuration Commands
characters. You can use the
no name
command to restore
it to the default setting.
revision version
: Set the MST versions in the range 0 to
65535. You can use the
no name
command to restore it
the default setting.
Show
: Shows the information of the MST region.
Examples
This example shows how to enter the MST configuration
mode, and map VLANs 3. 5 to 10 to MST instance 1:
Ruijie(config)# spanning-tree mst configuration
Ruijie(config-mst)# instance 1 vlan 3, 5-10
Ruijie(config-mst)# name region 1
Ruijie(config-mst)# revision 1
Ruijie(config-mst)# show
MST configuration
Name [region1]
Revision 1
Instance Vlans Mapped
---------- ---------------------
0 1-2,4,11-4094
1 3,5-10
-----------------------------------
Ruijie(config-mst)# exit
Ruijie(config)#
To remove VLAN 3 from instance 1, execute this command
after entering the MST configuration mode:
Ruijie(config-mst)# no instance 1 vlan 3
Delete instance 1:
Ruijie(config-mst)# no instance 1
You can verify your settings by entering the
show
command of the MST configuration commands.
Command Description
show spanning-tree
mst
Show the MST region
configuration.
instance instance-id
vlan vlan-range
Add VLANs to the MST
instance.
name
Configure the name of MST.
revision
Configure the version of MST.
Related
commands
show
Show the MST mode in the
MST configuration mode.