Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 192 / 1191

S2600E/P CLI Reference Guide Chapter 10 MSTP Configuration Commands
Command
mode
Global configuration mode.
Examples
Ruijie(config)# spanning-tree mode stp
Command Description
Related
commands
show spanning-tree
Show the spanning-tree
configuration.
10.1.7 spanning-tree mst configure
Use this command to enter the MST configuration mode in the global
configuration mode and configure the MSTP region. Use the
no
form of the
command to restore all parameters (name, revision, vlan map) to the default
values.
spanning-tree mst configuration
no spanning-tree mst configuration
Default
configuration
By default, all VLANs are mapped to the instance 0,
name
is empty, and
revision
is 0.
Command
mode
Global configuration mode.
Usage
guidelines
To return to the privileged EXEC mode, enter
end
or
Ctrl+C.
To return to the global configuration mode, enter
exit
.
After entering the MST configuration mode, you can use
the following commands to configure parameters:
instance instance-id vlan vlan-range
: Adds the VLANs to
the MST instance. The range of
instance-id
is 0 to 64 and
the range of VLAN is 1 to 4095. The
vlan-range
can be a
collection of some inconsecutive VLANs separated with
comma or some consecutive VLANs in the form of start
VLAN number–end VLAN number. For example,
instance
10 vlan 2,3,6-9
means that VLANs 2, 3, 6, 7, 8, 9 are
added to instance 10. By default, all VLANs are in
Instance0. To remove a VLAN from an instance, use the
no
form of the command:
no instance instance-id
[
vlan
vlan-range
]. (In this case, the range of instance is 1 to 64).
name name
: Specify the MST name, a string of up to 32