Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1147 / 1191

S2600E CLI Reference Guide Chapter 3 CPU-LOG Configuration Commands
100 4% 2% 1% datapkt_rcv_thread
101 0% 0% 0% keepalive_link_notify
102 0% 0% 0% rerp_msg_recv_thread
103 0% 0% 0% ip_scan_guard_task
104 0% 0% 0% ssp_ipmc_hit_task
105 0% 0% 0% ssp_ipmc_trap_task
106 0% 0% 0% hw_err_snd_task
107 0% 0% 0% rerp_packet_send_task
108 0% 0% 0% idle_vlan_proc_thread
109 0% 0% 0% cmic_pause_detect
110 1% 1% 1% stat_get_and_send
111 0% 1% 0% rl_con
112 75% 80% 90% idle
In the list above, the first 3 lines indicates the system CPU
utilization in 5sec, 1min and 5min, including LISR, HISR and
task. Then, it describes the detailed CPU utilization
distribution:

No
：
Sequence number

5Sec
：
CPU utilization of the tasks in 5sec.

1Min
：
CPU utilization of the tasks in 1min.

5Min
：
CPU utilization of the tasks in 5min.
The first 2 lines in the list above indicate the CPU utilization
of all LISRs and HISRs. From the 3
rd
line, it begins to refer
to the CPU utilization of the tasks. The last line refers to the
CPU utilization of the idle task, which is the same as the
“
System Idle Porcess
”
in the Windows. In the example
above, CPU utilization of idle task within 5s is 75%,
indicating that 75% CPU is idle.
3.1.2 cpu-log
Use this command to configure the low and high threshold of the cpu log
utilization limit manually.
cpu-log log-limit low_num high_num
Parameter Description
log-limit The command descriptor prompting the
log limit.
Parameter
description
low_num Set the low threshold of the cpu log
utilization limit.