Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 140 / 1191

S2600E/P CLI Reference Guide Chapter 4 LACP Configuration Commands
guidelines
Examples
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# port-group 1 mode active
Command Description
Related
commands
lacp port-priority
Set the LACP port priority.
4.1.2 lacp port-priority
Use this command to set the LACP port priority. Use the
no
form of this
command to return to the default value.
lacp port-priority port-priority
no lacp port-priority
Parameter Description
Parameter
description
port-priority
The port priority, in the range of
0-65535.
Default
configuration
By default, the port priority is 32768 .
Command
mode
Interface configuration mode.
Usage
guidelines
When multiple ports are to be aggregated, the ports with
high priorities take precedence and the port with the
highest priority is selected as the master port. The port
priority sequence is determined according to the wire
quality.
The LACP cannot be enabled on the ports with the function
of forbidding the member ports to add to or leave the AP
enabled; and the function of forbidding the member ports to
add to or leave the AP cannot be enabled on the LACP
member ports. The AP with the function of forbidding the
member ports to add to or leave cannot configured as the
LACP AP, and function of forbidding the member ports to
add to or leave the AP cannot be enabled on the LACP AP.
The SYSLOG will be displayed when the LACP fails to
leave the AP due to external function limitations, such as: