Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1172 / 1191

S2600E CLI Reference Guide Chapter 7 Syslog Configuration Commands
console in a second.
except
By default, the severity level is
error(3). The rate of the log whose
severity level is less than or equal to
this severity level is not controlled.
severity
Log severity level with the range from
0 to 7. The lower the level is, the
higher the severity is.
Default
configuration
Disabled.
Command
mode
Global configuration mode.
Usage
guidelines
Use this command to control the syslog outpt to prevent
the massive log output.
Examples
The example below sets the number of the logs (including
debug) processed in a second as 10. However, the logs
with warning or higher severity level are not controlled:
Ruijie(config)#logging rate-limit all 10 except warnings
Command Description
show logging
count
Show the log statistics.
Related
commands
show logging
Show the logs and related log
configuration parameters in the buffer.
7.1.10 logging server
Use this command to record the logs in the specified Syslog sever. The no form
of the command deletes the Syslog server with specified address from the
Syslog server list.
logging server { ip-address [ vrf vrf-name ] | ipv6 ipv6-address }
no logging server { ip-address [ vrf vrf-name ] | ipv6 ipv6-address }