Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1171 / 1191

S2600E CLI Reference Guide Chapter 7 Syslog Configuration Commands
Usage
guidelines
RGOS can not only show the log information in the
Console window and VTY window, but also record it in
different equipments such as the memory buffer, the
FLASH and Syslog Server. This command is the total log
switch. If this switch is turned off, no log will be displayed
or recorded unless the severity level is greater than 1.
Examples
The following example disables the log switch in the
equipment.
Ruijie(config)# no logging on
Command Description
logging buffered
Record the logs to an internal buffer.
logging Record logs to the Syslog server.
logging file
flash:
Record logs on the FLASH.
logging console
Set the log level to be displayed on
the console.
logging monitor
Set the log level to be displayed on
the VTY window (such as telnet
window) .
Related
commands
logging trap
Set the log level to be sent to the
Syslog server.
7.1.9 logging rate-limit
Use this command to enable log rate limit function to limit the output logs in a
second in the global configuration mode. The no form of this command disables
log rate limit function.
logging rate-limit { number | all number | console { number | all number }}
[ except severity ]
no logging rate-limit
Parameter Description
number
The number of logs processed in a
second with the range from 1 to
10000.
all
Set rate limit to all the logs with
severity level 0-7.
Parameter
description
console
Set the amount of logs shown in the