Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 146 / 1191

S2600E/P CLI Reference Guide Chapter 5 VLAN Configuration Commands
Usage
guidelines

This command is only valid for the access port.

The configuration of this command is the same as
specifying the VLAN to which interface belongs in the
interface configuration mode (that is the
switchport
access vlan
v
lan-id
). For the two commands of
adding the interface to the VLAN, the command
configured later will overwrite the one configured
before and take effect.

The configuration of adding the layer-2 AP into
current VLAN through this command will only take
effect for the layer-2 AP port, but not for the member
port of the layer-2 AP port.
Examples
The following example adds the interface GigabitEthernet
0/10 into the VLAN20.
Ruijie# configure terminal
SwitchA(config)# vlan 20
SwitchA(config-vlan)# add interface GigabitEthernet 0/10
Ruijie# show interface GigabitEthernet 0/10 switchport
Interface Switchport Mode Access Native Protected
VLAN lists
---------- -------- ----- ----- ---- ----------
-------
GigabitEthernet 0/10 enabled ACCESS 20 1 Disabled
ALL
The following example adds the interface range
GigabitEthernet 0/1-10 into the VLAN200.
Ruijie# configure terminal
SwitchA(config)# vlan 200
SwitchA(config-vlan)# add interface range GigabitEthernet
0/1-10
Ruijie# show vlan
SwitchA#show vlan
VLAN Name Status Ports
---- ------- ------------
----------------------------
1 VLAN0001 STATIC
Gi0/11,Gi0/12,Gi0/13,Gi0/1
4,Gi0/15,
Gi0/16,Gi0/17,Gi0/18,Gi0/1
9,Gi0/20,Gi0/21, Gi0/22,