Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 59 / 1191

S2600E/P CLI Reference Guide Chapter 3 SSH Configuration Commands
3.1.5 ip ssh version
Use this command to set the version of the SSH server. Use the no form of this
command to restore it to the default setting.
ip ssh version { 1 | 2 }
no ip ssh version
Parameter Description
1
Support the SSH1 client connection
request.
Parameter
description
2
Support the SSH2 client connection
request.
Default
configuration
SSH1 and SSH2 are compatible by default. When a
version is set, the connection sent by the SSH client of
this version is accepted only. The no ip ssh version
command can also be used to restore it to the default
setting.
Command
mode Global configuration mode.
Usage
guidelines
This command is used to configure the SSH connection
protocol version supported by SSH Server. By default, the
SSH Server supports SSH1 and SSH2. If Version 1 or 2 is
set, only the SSH client of this version can connect to the
SSH Server. Use the show ip ssh command to show the
current status of SSH Server.
Examples
The following example sets the version of the SSH Server:
Ruijie# configure terminal
Ruijie(config)# ip ssh version 2
Command Description
Related
commands
show ip ssh
Show the current status of the SSH
Server.
Version
description The software version must be RGOS10.1 and later.