Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1096 / 1191

S2600E CLI Reference Guide Chapter 7 SEM Configuration Commands
Note
The policy configuration does not take effect until the
commit command is used in SEM configuration mode to
submit it.
A policy is checked for validity when it is submitted. If the
policy configuration does not pass the validity check,
policy registration and the submission fail.
A policy without any event configured cannot pass the
validity check.
A policy without action can pass the validity check, but
does nothing after being triggered. Therefore, an alarm is
sent when such a policy is submitted.
To give up your policy modification, you can use the
rollback command to roll back.
Note
The SEM policy does not take effect when starting up the
device, and it takes effect only when the configuration
configured on the device’s Cosole is available. For details,
refer to the smart manager policy bootup-delay.
Note
When several events are configured for a policy, SEM
automatically arranges the events alphabetically in a
parallel relationship. The other events are taken as the
additional conditions of the first event. The relations among
all the events except the first event are the one between
current event and the combination of all the previous
events. Therefore, the first event is blocked out for the
parallel relationship and the default relation is and.
Note
When several events are configured for a policy, SEM
automatically arranges the events alphabetically in a
parallel relationship. The other events are taken as the
additional conditions of the first event. The relations among
all the events except the first event are the one between
current event and the combination of all the previous
events. Therefore, the first event is blocked out for the
parallel relationship and the default relation is and.
Event variables available to all policies:
Variable Name Function