Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 243 / 1191

S2600E/P CLI Reference Guide Chapter 1 IP Address Configuration Commands
cannot appear on two or more interfaces of a device.
In general, the layer-2 switch is configured a default
gateway with the ip default-gateway command.
Sometimes the layer-2 switch may be managed through
the telnet, and the management IP and default gateway of
the layer-2 switch needed to be modified. In this case, after
configuring any one of the ip address and ip
default-gateway command, the other cannot be
configured any more due to the configuration change
which causes failing to access this device through the
network. So you need to use the keyword gateway in the
ip address command to modify both the management IP
and default gateway. The keyword gateway is not in the
output of show running config , but in the output of ip
default-gate command.
Examples
In the example below, the primary IP address is configured
as 10.10.10.1, and the network mask is configured as
255.255.255.0.
ip address 10.10.10.1 255.255.255.0
In the example below, the default gateway is configured as
10.10.10.254
ip address 10.10.10.1 255.255.255.0 gateway 10.10.10.254
Command Description
Related
commands
show interface
Show detailed information of the
interface.
Platform
description -
1.2 Address Resolution Protocol (ARP) Configuration Commands
1.2.1 arp
Use this command to add a permanent IP address and MAC address mapping
to the ARP cache table. The no form of this command deletes the static MAC
address mapping.
arp ip-address MAC-address type [ alias ]