Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 678 / 1191

S2600E CLI Reference Guide Chapter 7 Port-based Flow Control Configuration Commands
Examples
The example below describes how to configure a static secure
address 00d0.f800.5555 with VID 2 for the trunk port g 0/10 :
Ruijie(config)# inter g0/10
Ruijie(config-if)# switchport port-security mac-address
00d0.f800.5555 vlan 2
The example below describes how to enable the Sticky MAC
address learning on the interface
g0/10
:
Ruijie(config)# inter g0/10
Ruijie(config-if)# switchport port-security sticky
mac-address
Command Description
show port-security
Show port security settings.
switchport
port-security
Enable the port-security.
switchport
port-security binding
Configure the secure address
binding.
switchport
port-security
mac-address interface
Set the static secure address in
the privileged mode.
switchport
port-security
mac-address
Set the static secure address in
the interface configuration
mode.
Related
commands
switchport
port-security aging
Set the aging time for the
secure address.
7.1.10 switchport port-security
maximum
Use this command to set the maximum number of the port secure address.. Use the no form
of the command to restore it to the default setting.
switchport port-security maximum value
[ no ] switchport port-security maximum
Parameter Description
Parameter
description
value Maximum number of the secure
address, in the range of 1 to
128.