Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1163 / 1191

S2600E CLI Reference Guide Chapter 7 Syslog Configuration Commands
no logging buffered
default logging buffered
Parameter Description
buffer-size
Size of the buffer is related to the
specific device:
For the kernel / aggregation switches,
4K to 10M bytes.
For the access switches, 4K to 1M.
For other devices, 4K to 128K Bytes.
Parameter
description
level
Severity of logs, 0 to 7. The name of the
severity or the numeral can be used.
Default
configuration
The buffer size is related to the specific device type.
1. kernel switches: 1M Bytes;
2. aggregation switches: 256K Bytes;
3. access switches: 128K Bytes;
4. other devices: 4K Bytes
The log severity is 7.
Command
mode Global configuration mode.
Usage
guideline
s
The memory buffer for log is used in recycled manner. That is,
when it is full, the oldest information will be overwritten. To
show the log information in the memory buffer, run show
logging at the privileged user level.
The logs in the memory buffer are temporary, and will be
cleared in case of device restart or the execution of command
clear logging by privileged user. To trace a problem, it is
required to record logs in flash or send them to Syslog Server.
The log information of the RGOS is classified into the
following 8 levels:
Table-1
Keyword Level Description
Emergencies 0
Emergency case, system cannot
run normally
Alerts 1
Problems that need immediate
remedy