Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 1069 / 1191

S2600E CLI Reference Guide Chapter 7 SEM Configuration Commands
lt less than
ne unequal to
exit-val exit-value
The value that recover comparison.
Default
configuration By default, no event is configued.
Command
mode SEM configuration mode.
Usage
Guideline
The event counter command is used to monitor the named
counters in SEM, which are usually changed by the action
counter.
When the combinations between the command counter and
entry-op/entry-val are patterned successfully, an event is
triggered. Then, the current patterning stops, meaning the
event detection fails.
When triggered patterning stops, the combinations between
the command counter and exit-op/exit-val are patterned. If
the patterning succeeds, the combined patterning with
entry-op and entry-val recovers.
Available events:
Variable Name Function
_counter_name Indicates the name of the
named counter
_counter_value Indicates the value of the
named counter
Examples
The following example configures policy counter
Test_Counter. When the value of Test_Counter is larger
than 10, a log is generated and Test_Counter is set to 0.
When the value of Test_Counter is larger than 5,
monitoring recovers.
Ruijie(config)#intelligence manager applet Test_1
Ruijie(config-applet)#event tag monitor_counter counter
name Test_Counter entry-op ge entry-val 10 exit-op gt
exit-val 5
Ruijie(config-applet)#action 10 counter name