Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 221 / 1191

S2600E/P CLI Reference Guide Chapter 11 GVRP Configuration Commands
11.1.5 gvrp timer
Use this command to set the GVRP timer. Use the
no
form of this command to
restore it to the default setting.
gvrp timer
{
join
|
leave
|
leaveall
}
timer_value
no gvrp timer
Parameter Description
join
timer_value
Control the maximum delay before
sending the advertisement on the port.
The actual sending interval is in the
range of 0 to the maximum delay.
leave
timer_value
Control the waiting time before removing
the VLAN from the port with the Leave
Message received. If the Join Message
is received again within this time range,
the port-VLAN relation is still exist and
the timer becomes invalid. If no Join
Message is received on the port, the port
status will be the Empty and removed
from the VLAN member list.
Parameter
description
leave all
timer_value
Control the minimum interval of sending
the LeaveAll Message on the port. If the
LeaveAll Message is received before the
timer expires, the timer re-counts. If the
timer expires, send the LeaveAll
Message on the port and also send this
Message to the port, so that the Leave
timer begins counting. The actual
sending interval is ranging from leaveall
to ljoin.
Default
Join timer: 200ms;
Leave timer: 600ms;
Leaveall timer: 10000ms.
Command
mode
Global configuration mode.
Usage
guidelines
Use the
show gvrp configuration
to show the related
configurations.