Ruijie Networks RG-S2600E Series, Справочное руководство CLI

Страница: 98 / 1191

S2600E/P CLI Reference Guide Chapter 1 Interface Configuration Commands
no switchport mode
Parameter Description
access
Configure the switch port as an access
port.
Parameter
description
trunk
Configure the switch port as a trunk port.
Default
configuration
The default mode of switch port is access port.
Command
mode
Interface configuration mode.
Usage
guidelines
If a switch port mode is access port, it can be the member
port of only one VLAN. Use
switchport access vlan
to
specify the member of the VLAN.
A trunk port can be the member port of various VLANs
defined by the allowed-VLAN list. The allowed VLAN list of
the interface determines the VLANs to which the interface
may belong. The trunk port is the member of all the VLANs
in the allowed VLAN list. Use
switchport trunk
to define
the allowed-VLANs list.
Examples
Ruijie(config-if)# switchport mode trunk
Command Description
switchport
access
Use this command to configure an
interface as a statics access port and
assign it to a VLAN.
Related
commands
switchport trunk
Use this command to specify a native
VLAN and the allowed-VLAN list for
the trunk port.
1.1.19 switchport trunk
Use this command to specify a native VLAN and the allowed-VLAN list for the
trunk port. Use the
no
form of the command to restore it to the default setting.
switchport trunk
{
allowed vlan
{
all |
[
add | remove | except
]
vlan-list
}
| native
vlan vlan-id
}
no switchport trunk
{
allowed vlan | native vlan
}