Omron NJ101-10 Series, Руководство пользователя

Страница: 30 / 280

Manual name Cat. No. Model numbers Application Description
Sysmac Studio
Robot Integrated System
Building Function with Robot
Integrated CPU Unit Opera-
tion Manual W595 SYSMAC-SE2 ££
£
SYSMAC-
SE200D-64
Learning about the
operating procedures
and functions of the
Sysmac Studio to
configure Robot Inte-
grated System using
Robot Integrated
CPU Unit. Describes the operating procedures of the
Sysmac Studio for Robot Integrated CPU
Unit.
Sysmac Studio
Robot Integrated System
Building Function with IPC
Application Controller Opera-
tion Manual W621 SYSMAC-SE2 ££
£
SYSMAC-
SE200D-64
Learning about the
operating procedures
and functions of the
Sysmac Studio to
configure Robot Inte-
grated System using
IPC Application Con-
troller. Describes the operating procedures of the
Sysmac Studio for IPC Application Control-
ler.
Sysmac Studio
3D Simulation Function Oper-
ation Manual W618 SYSMAC-SE2
££
£
SYSMAC-SA4 ££
£
-64
Learning about an
outline of the 3D sim-
ulation function of the
Sysmac Studio and
how to use the func-
tion. Describes an outline, execution procedures,
and operating procedures for the 3D simu-
lation function of the Sysmac Studio.
NJ-series
NJ Robotics CPU Unit
User’s Manual W539 NJ501-4
£££
NJ501-R £££
Controlling robots
with NJ-series CPU
Units. Describes the functionality to control robots.
NJ/NY-series
NC Integrated Controller
User’s Manual O030 NJ501-5300
NY532-5400 Performing numerical
control with NJ/NY-
series Controllers. Describes the functionality to perform the
numerical control.
NJ/NY-series
G code
Instructions Reference Man-
ual O031 NJ501-5300
NY532-5400 Learning about the
specifications of the
G code/M code in-
structions. The G code/M code instructions are descri-
bed.
NJ/NX-series
Troubleshooting Manual W503 NX701-
££££
NX102-
££££
NX1P2- ££££
NJ501-
££££
NJ301- ££££
NJ101-
££££
Learning about the
errors that may be
detected in an
NJ/NX-series Con-
troller. Concepts on managing errors that may be
detected in an NJ/NX-series Controller and
information on individual errors are descri-
bed.
Sysmac Studio Version 1
Operation Manual W504 SYSMAC
-SE2
£££
Learning about the
operating procedures
and functions of the
Sysmac Studio. Describes the operating procedures of the
Sysmac Studio.
CNC Operator
Operation Manual O032 SYSMAC-RTNC0
£
££
D
Learning an introduc-
tion of the CNC Op-
erator and how to
use it. An introduction of the CNC Operator, instal-
lation procedures, basic operations, con-
nection operations, and operating proce-
dures for main functions are described.
NX-series
EtherCAT
®
Coupler Unit
User’s Manual
W519 NX-ECC
£££
Learning how to use
the NX-series Ether-
CAT Coupler Unit
and EtherCAT Slave
Terminals. The following items are described: the over-
all system and configuration methods of an
EtherCAT Slave Terminal (which consists of
an NX-series EtherCAT Coupler Unit and
NX Units), and information on hardware,
setup, and functions to set up, control, and
monitor NX Units through EtherCAT.
Related Manuals
28
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)