Omron NJ101-10 Series, Руководство пользователя

Страница: 263 / 280

A-3-5
Settings for MDP-compatible Slaves from Other Manufacturers
The MDP (Modular Device Profile) defines the data structure for the settings in EtherCAT slaves. It is
an EtherCAT specification. You can use slaves that support MDPs from other manufacturers on the
EtherCAT Tab Page.
There are two sets of settings, slave and module, for MDP-compatible slaves.
The setting items and setting procedure for MDP-compatible slaves with the Sysmac Studio are de-
scribed below.
Setting Items
This section describes each setting item for slave settings and module settings.

Slave Setting Items
Some items in the slave settings only display the current setting. The other items in the slave set-
tings are changeable.
a. Items for which the current setting is displayed only.
The names of items and their settings are as follows:
Name Meaning of setting
Device name The device name that is set in the EtherCAT configuration
Model The model number of the slave
Product name The product name of the slave
Revision The revision of the slave
Number of modules The number of modules that are connected
b. Items for which the current setting is changeable.
The items that you can edit are the PDO Map Settings , Module config send method , Setting
Parameters , and Backup Parameter Settings . The meanings of these settings are given be-
low.
PDO Map Settings
• The PDO Map Settings displays the settings for the process data assigned for the slave.
• When valid PDOs are present, a list of them is displayed.
• When valid PDOs are not present, "---" is displayed.
• Process data is assigned for each slave in default by the Sysmac Studio. To change the proc-
ess data assignments, click the Edit PDO Map Settings Button. Refer to A-3-4 Editing PDO
Entry Tables on page A-21 for details.
Module config send method
• This is the area to select whether to send the module configuration information to the device
or not.
• When you select Send , module configuration information commands are created for the devi-
ces. However, the slaves must support this function.
• When you select Do not send , module configuration information commands are not created
for the devices.
• The default is Do not send .
Appendices
A-27
NJ/NX-series CPU Unit Built-in EtherCAT Port User's Manual (W505)
A-3 Multi-vendor Environments
A
A-3-5 Settings for MDP-compatible Slaves from Other Manufacturers