![background image](http://html1.mh-extra.com/html/omron/f3sg-sr-series/f3sg-sr-series_user-manual_744123355.webp)
327
F3SG-SR
User’s Manual
Chapter
6
Wiring Exa
m
p
le
s
(f
or F3
SG-SR)
Input/Output Circuit and Applications
E
6-2-2. Muting System Wiring Examples
6-2-2-1. Standard Muting Mode/Exit-Only Muting Mode
[Wiring Example]
• When a functional earth is necessary, wire an earth cable according to the example in
Optical Synchronization and EDM Unused
. Also refer to
5-4-4. Functional Earth Connection
for more information.
F39-JG
C-L
F39-JG
C-D
24 VDC
Wiring for NPN *1
24 VDC
S3
S4
*4
IN
PLC *5
*8
IN1
Safety controller
*6 *7
IN2
S1
S2
Receiver
Emitter
OSSD 1 (Black)
OSSD 2 (White)
24V/0V (Brown)
OPERATING RANGE
SELECT INPUT (Yellow) *2
TEST (Black)
Not used (White)
24V/0V (Brown)
0V/24V (Blue)
0V/24V (Blue)
AUX (Red)
MUTE B (Pink)
MUTE A (Gray)
RESET/EDM
(Yellow) *3
S1: Test switch
S2: Lockout reset switch, override switch or override cancel switch
S3, S4: Muting sensor
PLC: Programmable logic controller (Used for monitoring only.
NOT related to safety system.)
: Indicates a switch position
Function
Setting
DIP switch
SD Manager 3
EDM
EDM Disabled (factory default setting)
-
[External device monitoring] : Disable *9
Interlock
Auto Reset (factory default setting)
-
[Start interlock] : Disable
[Restart interlock] : Disable *9
Operating Range
Selection
Long : Open the OPERATING RANGE SELECT INPUT line of the emitter or connect the line to 24 VDC.
-
[Operating Range Selection] : Long mode *9
Standard Muting Mode
When not using the Intelligent Tap or the SD Manager 3, perform wiring according to the wiring diagram.
(factory default setting)
N/A
[Muting] : Enable
[Muting mode] : Standard Muting (Installation
Example1/2) *9
Exit-Only Muting Mode
N/A
[Muting] : Enable
[Muting mode] : Exit-Only Muting *9
External Test used
Connect the TEST line of the emitter to 24V/0V of the emitter via a test switch (NO contact). *10
N/A
[External test signal inversion] : Disable
Optical Synchronization
Open the COM(+) and COM(-) lines of the emitter.
*1. Reverse the polarity of the power supply when using in the NPN system. Select
a PLC and a safety controller of PNP or NPN type according to the system of
your application.
*2. Connect the line to 0 VDC if Operating Range Selection is used in Short Mode.
*3. Also used as OVERRIDE INPUT line.
*4. Make sure to connect an override cancel switch to the RESET line when using
the override function. Otherwise the override state may not be released by the
override cancel switch, resulting in serious injury.
*5. When connecting to the PLC, the output mode must be changed with the SD
Manager 3 according to your application. Refer to
for more information on setting this function by the SD Manager 3.
*6. Refer to
6-3. Connectable Safety Control Units
for more information.
*7. The safety controller and the F3SG-SR must share the power supply or be
connected to the common terminal of the power supply.
*8. This is the case for a PELV circuit.
*9. Set the function with the SD Manager 3, restore the settings to the F3SG-SR,
and perform wiring according to the wiring diagram.
*10.This wiring example shows light emission stop when connected to 24 VDC with
PNP setting, and light emission stop when connected to 0 VDC with NPN
setting. If TEST switch is not needed, refer to
MUTE A
MUTE B
Timing chart
Beam state: Unblocked
Blocked
Test switch (S1)
OSSD
Intelligent Tap
Needed *9
Содержание F3SG-SR Series
