7-4. Calibration Error
A Readback Calibration will be done while actual calibration.
It checks whether calibration is done successfully and inform you with the error message.
-74, "ADC-V low limit over"
This occurs when it is out of voltage ADC low range.
-75 "ADC-V high limit over"
-75, ADC-V high limit over
This occurs when it is out of voltage ADC high range.
-76, "ADC-A low limit over"
This occurs when it is out of current ADC low range.
-77, "ADC-A high limit over"
This occurs when it is out of current ADC high range.
7-5. Fixed Memory Check Error
Before release, we save default value in fixed memory.
It checks data, and inform you with error message.
-80, "Memory limit volt error"
There is an error in voltage memory limit.
-81, "Memory limit curr error"
There is an error in current memory limit.
-82, "Memory max volt error"
There is an error in maximum voltage value.
-83, "Memory max curr error"
There is an error in maximum current value.
-84, "Memory volt decimal error"
There is an error in current decimal point.
-85, "Memory curr decimal error"
There is an error in current decimal point.
-86, "Memory volt length error"
There is an error in voltage digit length.
-87, "Memory curr length error"
There is an error in current digit length.
-88, "Not match volt length and limit"
Setting voltage value and length of digit is different.
-89, "Not match curr length and limit"
Setting current value and length of digit is different.
- 70 -