3-2. Constant Current Operation(CC)
Constant Current output Mode, Follow the sequence below.
(When Last State Mode is disabled.)
▌Power Switch ON
Check "**OUTPUT OFF**" Mode when the power is ON.
▌Connect load to output terminal
▌Connect load to output terminal.
▌Press V/I LMT Key to set-up the Limit value.
▌To set-up voltage, use cursor key. Move cursor key to voltage range,
and use encoder switch to set-up the voltage.
In mode Protection(OVP/UVL/OVL), voltage cannot rise more than Protection
level, if user tries to raise more than Protection Limit, "PROTECTION LIMIT"
M
ill b di
l
d
d
t
i P t
ti
L
l
l
Message will be displayed, and set-up in Protection Level value.
▌To set-up current, use cursor key to change the current value.
In mode Protection(OVP/UVL/OVL), current cannot rise more than Protection
level, if user tries to raise more than Protection Limit, "PROTECTION LIMIT"
Message will be displayed, and set-up in Protection Level value.
▌Press OUTPUT ON/OFF Key when all the set-up is done.
LCD Di
l y di
l y
db
k V lt
/Cu
t
LCD Display displays readback Voltage/Current.
▌Check CC Lamp is ON, CV Lamp is OFF.
If the lamp is ON and OFF opposite, check if there is enough voltage
supplying to load. Raise current Limit Value.
- 18 -
