6-7. Factory Commands
Calibration restore and 10 other functions setting.
FACT:USER-M {CLR}
Once 『User Memory』reset is done, previous data cannot be restored.
Read reference "5-3. USER-MEM CLEAR" for further information
> CLR
Reset user memory range.
ex) fact:user-m clr
FACT:LAST-STA {DIS|SAF|FUL}
Commands which set-up output condition when the power is ON.
> DIS
Disable, Booting power supply with default value.
> SAF
Safety, restores power before shut-down, and booting with output OFF.
> FUL
Fully, Booting power supply with same condition before it was OFF.
ex) fact:last-sta saf
Safety상태로 설정합니다.
FACT:LAST-STA?
It is command which checks Last-state condition value.
Return value
"DISABLE"
"SAFETY"
"FULLY"
ex)fact:last-sta?
return value "SAFETY"
FACT:AUTO-CUR {DIS|ENA}
This command makes voltage/current range to minimum when front panel is not used
for a long time.
> DIS
Disable, Auto cursor is disabled.
> ENA
Enable, Auto cursor is enabled.
ex) fact:auto-cur ena
Set-up to enable auto cursor.
FACT:AUTO-CUR?
It is command which check Auto Cursor setting value.
Return value
"0"
Disable Condition
"1"
Enable Condition
ex)fact:auto-cur?
return value "1"
ex)fact:auto cur?
return value 1
FACT:AUTO-LOC {DIS|ENA}
This command can lock front panel keys when there is no act for a long time.
> DIS
Disable, Auto Lock function is disabled.
> ENA
Enable, Auto Lock function is enabled.
ex) fact:auto-loc ena
Set-up to enable auto lock function.
- 63 -
