1. Channel 1(P1) 16Char Type LCD Display
Menu which shows Channel 1 Voltage/Current value, Option, Various Menu.
2. Channel 2(P2) 16Char Type LCD Display
Menu which shows Channel 2 Voltage/Current value, Option, Various Menu.
From the sight of front side, Channel 1 and Channel 2 are bisymmetry,
independent control method. They are explained below.
independent control method. They are explained below.
3. CV Mode Lamp
In CV(Constant Voltage) Mode, the lamp is lighted.
4. CC Mode Lamp
In CC(Constant Current) Mode, the lamp is lighted.
5 OVP S t
C
diti
L
5. OVP Set-up Condition Lamp
When in Over Voltage Protection is Set-up, the lamp will be lighted.
They can be changed in Factory Mode.
6. OCP Set-up Condition Lamp
When in Over Current Protection is Set-up, the lamp will be lighted.
They can be changed in Factory Mode.
7. Remote Interface Lamp
When remote interface is recalled, Lamp will be lighted,
Front panel cannot be used in this condition.
8. Error Lamp
When any Error occurs, Lamp will be lighted, when all the error message is checked,
Lamp will be light-out.
9. Output Voltage/Current ON/OFF Key
Print or Shut off Voltage/Current from Output Terminal.
10. Voltage/Current Select & Limit Display Key
Able to move the cursor to Voltage or Current, and check the present output Voltage/Current.
11. I/O LOCAL, Error, Calibrate Key
/
,
,
y
Set-up RS232C or GPIB, Check Error Message & Calibrate output Voltage/Current.
12. Protect, Lock, Factory Key
Set-up protections such as OVP/OCP/UVL/OVL/UCL/OCL and etc.
Press lock key more than 1second to lock the keys on Front Panel.
Also, Factory Mode has various options to set-up.
- 12 -
